Yadda Za Ka Yi Ƙarfin Ƙarfin Wuta a Ƙananan Gidajen Wanka

Shirya Ƙananan Wurin Wanka

Kamfanin wanka na iya samun damar yin amfani da kayan aikin wanka da kuma kayan aiki na gida. A cikin wannan jagorar, ana samun cikakken bayani game da tsarin aikin wanka, daga fahimtar tsarin da ke akwai zuwa gwaji da kuma rufewa. Ko kai ƙwararren DIYer ne ko kuma ƙwararren mai aikin famfo, waɗannan hanyoyin da aka faɗaɗa za su taimaka maka ka cimma sakamako mai ƙarancin ruwa, mai jituwa da lambar a cikin kwata-kwata.

Ƙananan dakunan wanka yawanci suna da girman 35 zuwa 45 murabba'in ƙafa, wanda ke nufin kowane inci na sararin samaniya dole ne a inganta. Ana gyara matsayin bututun ruwa sau da yawa saboda joists da wuraren stud, don haka sassauci yana da iyakance. mabuɗin shine aiki a cikin sawun da ke akwai yayin haɓaka kayan aiki da haɗin kai. Wannan labarin ya rufe kowane mataki a zurfin, gami da zaɓin kayan aiki, shigar da kayan aiki, ƙa'idodin gwaji, da kuma matsalolin gama gari. Hakanan zaku koyi lokacin da zaku kawo ƙwararren masani da yadda zaku kiyaye sabon tsarin ku na shekaru na aiki ba tare da matsala ba.

1. Yin nazarin tsarin bututun ruwa da ake da shi

Kafin kowane sabon kayan aiki ya taɓa bene, dole ne ka tsara cikakken tsarin bututun da ke akwai. A cikin ƙananan wanka, bango da bene galibi suna ƙunshe da bututun ruwa da yawa waɗanda aka cika cikin ƙananan rami. Nemo manyan hanyoyin samar da ruwa (yawanci 1⁄2-inch jan ƙarfe ko PEX), tsarin zubar da ruwa-ɓataccen iska (DWV), da duk wani ɗakunan iska wanda ke shiga rufin. Yi amfani da mai gano bututu ko borescope don bin diddigin bututun da ke gudana a bayan ganuwar da aka gama. Yi alama da yanayin ɓarna don flange na gidan wanka, ruwan wanka, da ruwan wanka a kan bene na bene. A nan ana iya yin daidai da auna a nan don hana mafarkin yanke bututu a lokacin shigarwa kai tsaye.

Yi hankali sosai ga shugabancin kayan aikin ƙasa da bangon bango. Idan kuna buƙatar sauya layin fitarwa, kuna iya buƙatar yin ƙugiya ko yin ramuka ta hanyar shimfidawa, wanda ke buƙatar kulawa da kyau don kula da amincin tsari. Misali, ruwan wanka wanda ya sauka tsakanin kayan aikin na iya buƙatar rataye mai ɗaukar hoto ko yanki mai akwatin akwatin.

Muhimman Matakai don Yin Takaddama

• Nisa daga bango zuwa tsakiyar flange na gidan wanka (tsada 12 inci, amma tabbatar ta hanyar auna daga bangon da aka gama).
• Tsawon bawul din shawa kusan daga kasa mai gamawa (yawanci 3842 inci).
• Yanayin bawul din rufewa da ko suna da sauki bayan gamawa (idan ba haka ba, tsara wani kwamiti na shiga).
• Diamita da kayan bututun da ke akwai don dacewa da sabbin kayan haɗi (misali, jan ƙarfe 1⁄2-inch vs PEX).
• Tsakanin layin kwarara: dole ne a yi tsakanin layi a cikin 1⁄4 inch a kowace ƙafa.
• Nisa tsakanin cibiyoyin stud don sanin ko za a iya tallafawa gidan wanka ko wanka da aka rataye a bango.
• Location na duk wani vent stacks wani sabon fixture iya bukatar daure a cikin wani data kasance vent.

Ka ƙirƙiri zane mai zurfi tare da waɗannan girma. Ka ɗauki hoton da aka fallasa kafin ka rufe shi. Wannan takaddar tana da amfani sosai don gyara ko sake siyarwa a nan gaba.

2. Zaɓin Kayan da Ya Dace don Ƙananan Banɗaki

Zaɓin kayan yana da mahimmanci a cikin ƙaramin wuri saboda samun damar yana da iyaka kuma gyare-gyare sun fi wahala. Ga layukan samarwa, PEX (polyethylene mai haɗuwa da juna) galibi ana fifita shi akan tagulla saboda sassauci, wanda ke taimakawa kewayawa cikin ƙarancin sandunan. PEX kuma ya fi ƙarfin lalacewar daskarewa fiye da tagulla, kodayake wannan ba shine damuwa a cikin gidan wanka mai sanyaya ba. Don tsalle-tsalle, ABS ko PVC daidaitacce ne; duk da haka, idan lambar gida tana buƙatar baƙin ƙarfe don kashe sauti, la'akari da shi. baƙin ƙarfe ya fi nauyi kuma ya fi wahalar aiki da shi amma yana rage amo daga ɗakunan wanka na sama sosai.

Yi amfani da tagulla ko Chrome-plated tagulla fixture kashe maimakon roba su tsaya tsawon kuma su jure maimaita tightening. zabi silicone tushen plumber s mai ga O-zagayen da high quality Teflon tef ko bututu dope ga threaded connections. guji cheap matsawa fittings; su ne ayan da yayyo a low-clearance yankunan. Domin m wadata Lines, yi amfani da braided bakin karfe da tagulla tagulla da hade juriya lalata da kuma samar da wani hadari lafiya.

Kayan Aiki da Za Ka Bukata

• Mai yanke bututu (don PEX, tagulla, ko PVC)
• kayan aiki na cirewa ko kuma tufafin da aka yi da su
• Maɓallin kewayawa da maɓallin kwandon ruwa
• Ƙungiyoyin ƙofar tashar
• Matsayin jirgin ruwa
• SharkBite ko kayan aiki na crimp (dangane da tsarin PEX)
• Maganin roba da kuma na bututu
• Kwandon da tawul don gwaji
• Mai neman ƙwanƙwasa da ƙaramin fitila ko borescope
• Ƙarƙashin ƙusa ko kuma ƙusa mai ƙusa don wanka
• Jagorar bawul na shawa (sau da yawa tare da bawul)

Ku zuba jari a cikin mai tsabtace bututu mai kyau don yanke tsabta a kan tagulla da PEX. Ƙarƙashin gefuna na iya ɗaukar hatimin roba kuma ya haifar da jinkirin lalacewa.

3. Fahimtar Matsi da Ruwa

Ƙananan dakunan wanka suna fama da ƙananan matsin ruwa saboda dogon gudu daga mai sanyaya ruwa ko ƙananan layin samarwa. Kafin kammala, auna matsin ruwa na tsaye tare da ma'auni da aka haɗa zuwa wani waje mai ƙonawa ko fitowar injin wanka. Matsayin matsin gida mai kyau shine 4080 psi. Sama da 80 psi yana da haɗarin lalata kayan gyara; shigar da bawul mai rage matsin lamba (PRV) idan ya cancanta. Kasa da 40 psi na iya haifar da ƙarancin aikin shawa la'akari da famfo mai haɓaka matsin lamba ko manyan layin samarwa.

Don tsarin shawa, ana buƙatar bawul na daidaita matsa lamba ta hanyar lambar don hana ƙonawa. Waɗannan bawul ɗin suna riƙe da zafin jiki na fitarwa na yau da kullun koda lokacin da gidan wanka ya yi ruwan sha ko kuma an buɗe famfo. bawul ɗin thermostatic suna ba da iko mafi kyau amma suna da tsada. A cikin ƙananan dakunan wanka tare da shawa guda ɗaya, bawul na daidaita matsa lamba yawanci ya isa. Tabbatar da cewa yawan kwararar bawul (galons a minti ɗaya) ya dace da bawul na ƙananan kwararar bawul (GPM 1.52.0) da yawa.

4. Gyara Mataki-mataki don Maɓalli Uku

Yadda Za a Saka Wanka a Wurare Masu Ƙarfi

Wanka yana da sau da yawa mafi ƙalubale a cikin ƙaramin gidan wanka saboda buƙatar daidaitawa daidai da flange na ɗakin wanka. Tabbatar da flange yana daidai da bene mai ƙarewa (ko ɗan ƙasa, ta hanyar lambar). Yi amfani da gasket ɗin mara faifai ko zoben faifai na gargajiya tare da tsawo na ƙahon don ƙarin tsawo idan flange ya zauna ƙasa. Tsananta kwalban ɗakin wanka da hannu kawai over-tissing na iya fasa flange ko tushe na gidan wanka. Bayan saita gidan wanka, bincika don girgiza; shim da tushe tare da filastik shims na gidan wanka, sannan ka rufe rata tare da ƙwanƙwasa na 100% silicone caulk, barin baya ba a rufe don ba da damar gano ɓarkewa.

A cikin ƙananan ɗakunan wanka, la'akari da gidan wanka da aka rataye a bango. Waɗannan suna buƙatar tsarin ɗaukar hoto wanda aka saka a cikin bango, wanda ke ƙara rikitarwa amma yana sakin sararin ƙasa da sauƙaƙe tsaftacewa. Dole ne a ɗaure mai ɗaukar hoto zuwa sanduna, kuma ana ɓoye tsarin wanka a bayan kwamitin shiga.

Yin Wuta da kuma Ruwa

A cikin ƙananan dakunan wanka, bango-sanya ko sandar sandar sandar suna adana sararin ƙasa amma suna rikitar da daidaitawar ruwa. Yi amfani da kayan aiki na p-trap tare da adaftan juyawa don daidaitawa don bututun ruwa na waje. Don abubuwan banza, shigar da ƙarshen bayan wanka na wanka, sannan a haɗa da tarkon p-trap akan bangon bango. Aiwatar da bututun bututun ruwa zuwa duk wanka mai zamewa da kuma taƙaita hannu da juzu'i huɗu. Ƙara bawul ɗin rufewa na tagulla na tagulla na kwata-kwata na FLT: 1 a ƙarƙashin wanka don sauƙin kiyayewa a nan gaba. Layin samar da sassauƙa (ƙarƙƙwarar bakin karfe) dole ne a cikin ɗakunan ajiya suna lankwasawa ba tare da yin lankwasawa da tsayayya da lalata ba.

Idan ka shigar da sink na jirgin ruwa, ramin bayan zai iya zama gajere; yi amfani da tsawo idan ya cancanta. Don sinks na karkashin-jirgin, tabbatar da cewa buɗewar rufi ta daidaita da yanke kabad. Yi la'akari da zurfin zurfin inci 17 (maimakon inci 21 na yau da kullun) don barin ƙarin sararin ƙasa a cikin ƙanƙantaccen daki. Yi amfani da rufi na inci 1.25 don jirgin ruwa ko mirgina bango; inci 1.5 shine misali don manyan abubuwan banza. Koyaushe shigar da toshewar pop-up tare da haɗin tagulla toshewar filastik suna karya sauƙi.

Gidan Wanka da Wurin Ruwa

Dole ne a saita bawul din shawa daidai zuwa zurfin zurfin zurfin bangon da aka gama (yawanci allon siminti na inci 1⁄2-inch da tayal). Yi amfani da jagorar bawul na shawa mai haɗari (yawanci ya haɗa) don daidaita jikin bawul. Sanya haɗin tagulla kafin a saka bawul idan ana amfani da tagulla; don PEX, yi amfani da tsarin mai yawa don rage haɗuwa a bayan bangon shawa. Sanya bawul na daidaita matsa lamba FLT:1 don hana ƙonewa, wanda doka ta buƙata a yawancin hukunce-hukunce. Gwada bawul tare da katako a wuri kafin yin tayal. Don masu cika tub, tabbatar da cewa mai nutsewa ya isa ga gefen tub ba tare da tsoma baki da katangar tub ba.

Don ruwan sha, wurin da aka zubar da ruwa yana da mahimmanci. Tsakiyar tsakiya ta fi sauƙi, amma tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsararren tsarar

5. Yadda Za a Yi Wajan Samun Iska a Ƙananan Wucin Gwiwa

Kyakkyawan iska yana hana iskar gas daga shiga cikin gida kuma yana tabbatar da kwararar iska ta gudana cikin 'yanci. A cikin ƙananan dakunan wanka, sararin samaniya don ɗakunan wanka na musamman na iya zama iyakance. Yawancin lambobin gida suna ba da damar tsarin iska mai laushi inda ruwan wanka ke aiki azaman iska don wanka da shawa, idan dai diamita na bututu ya isa (yawanci inci 3 don wanka, inci 2 don wanka). A madadin haka, shigar da bawul din shigar da iska na iska na inji (AAV: 1) a ƙarƙashin wanka, wanda galibi ake kira Studor vent. AAVs suna buɗewa lokacin da matsa lamba ta ƙi ta faru kuma suna rufewa lokacin da ruwa ya gudana, yana kawar da buƙatar shigar da rufi.

Duba lambobin gida: wasu hukumomi ba su ba da izinin AAVs a sabon gini ko kuma suna buƙatar su kasance masu sauƙi don kulawa. Sanya AAV aƙalla inci 6 a sama da ƙuƙwalwar tarko da cikin sararin iska (kamar a cikin fanko). Kada ku binne shi a cikin rami na bango ba tare da kwamitin shiga ba. Don dakunan wanka inda ba a ba da izinin AAV ba, kuna iya buƙatar gudanar da sabon bututun iska zuwa babban ɗakunan, wanda zai iya zama ƙalubale a cikin gyare-gyare. Yi shiri kafin ta hanyar bincika sararin sama ko bango mai makwabtaka wanda zai iya ɓoye hanyar iska.

6. Yin Bincike a Cikakken Hanya

Bayan an gama dukkan hanyoyin, lokaci ya yi da za a yi gwajin matsin lamba. Ka kashe babban ruwan, sannan ka buɗe famfo mafi girma a cikin gidan don fitar da layin. Ka rufe dukkan kayan haɗi, sannan ka sake kunna ruwa a hankali yayin sauraron tsawa. Ka bincika kowane haɗin tare da fitila. Yi amfani da tawul na takarda ko kayan shafa don goge kowane kayan haɗi; har ma da jinkirin kuka zai iya gani a kan takarda mai bushewa. Don layin fitarwa, toshe babban ɗakunan da cika tafkuna da gallons da yawa na ruwa, sannan ka cire don lura da kwarara. Duba don gurgling, wanda ke nuna rashin isasshen iska.

Don layukan samarwa, gwajin matsin lamba na ƙwararru ya ƙunshi rufe dukkan hanyoyin fitarwa da matsin lamba zuwa 6080 psi tare da famfo na hannu, sannan kallon saukowa tsawon minti 30.

Matsalar Matsala a Kan Lines na Bayarwa

Idan lambar gida ta ba da izini, yi amfani da ma'aunin matsa lamba a kan wani waje spigot ko akwatin wanka don tabbatar da matsin lamba (4080 psi ne na yau da kullun). Idan ka shigar da PEX, yakamata a tabbatar da zoben crimp tare da ma'aunin tafi / ba. Tallafa duk wani haɗin da ake zargi da sake yin su nan da nan. Hakanan gwada zafin jiki na mai sanyaya ruwa da bawul ɗin rage matsa lamba ya kamata ya buɗe lokacin da aka ɗaga. Karatun takardu don bayananka.

7. Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarshen Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin

Bayan nasarar gwaji, rufe duk shigar da aka fallasa tare da ƙuƙwalwar wuta (idan kuna wucewa ta bango) ko silicone. Sanya farantin tsaro a wuraren shigar bango don layin samarwa da bututun ruwa. Sanya bawul ɗin rufewa tare da alamar dindindin (misali, Sink sanyi, Toilet) don tunani na gaba. Sanya allon shiga a bayan yatsun yatsunsu masu sauyawa ko tare da murfin magnetic don bawul masu wahalar isa. Don tsarin shawa, share bawul ɗin tare da katako da aka cire na tsawon sakan 30 don share ɓararra.

Bayan an gama komai, bincika cewa duk hannayen hannu da maɓallan suna aiki da kyau. Saita kusurwar kaifin shawa da kwararar sink. Sanya wurin wanka wanda ya dace da kwano yawancin wanka masu rataye a bango suna da siffofi na musamman. A ƙarshe, gudanar da dukkan kayan haɗi don cikakken sake zagayowar minti 15 don gano duk wasu matsalolin da suka faru kamar ruwa mai ruwa (bang lokacin da bawul din ya rufe). Sanya masu riƙe da ruwa mai ruwa idan ya cancanta suna da arha kuma suna hana lalacewar bututu.

Jerin Bincike na Mako-mako ga Masu Gida

• Bincika akwatin da ke ƙarƙashin sink don danshi ko wari
• Ka wanke gidan wanka kuma ka nemi wani abu da zai yi rawar jiki a tushe
• Yi amfani da bawul din shawa a cikin cikakken zangon sauraron ruwa
• Tabbatar da masu tsabtace ruwa suna da tsabta daga gashi da sabulu
• Gwajin rufin wanka don jinkirin zubar da ruwa (ƙara wasu saukad da launi na abinci zuwa tanki; idan launi ya bayyana a cikin kwano, maye gurbin rufin)
• Bincika farantin kwandon don samun ramuka ko kuma rashin dacewa
• Saurari ruwa mai gudana lokacin da duk kayan aiki suka kashe (yana nuna cewa akwai ruwa)

8. Kuskuren da Ya Kamata Mu Guje wa a Ƙananan Wucin Gwiwa

Ko da masu gyara gine-gine da suka ƙware suna faɗa cikin waɗannan tarkon sa'ad da sararin samaniya ya yi ƙunci:

• ]Ba a lissafa kaurin bangon da aka gama ba. ] Ticking ko wainscoting yana ƙara 1⁄2 zuwa 3⁄4 inch. Rough-in bawul din shawa mai zurfi, kuma ba za su daidaita da trim ba; m, kuma ba za su rufe rami ba.
• ] Fittings na filastik masu taurin kai. ] PVC da zaren ABS na iya fashewa ko tsagewa idan aka tura shi fiye da na hannu. Yi amfani da maɓallin madauri don riƙe mai laushi.
• ] Mantuwa don tallafawa bututu. ] Tsawon tsayin daka na kwance dole ne ya yi gangara da inci 1⁄4 a kowace ƙafa kuma a sanya shi tare da masu rataye kowane ƙafa 4. Bututuwar da ba a tallafawa ba sun faɗi kuma sun haifar da clogs.
• A cikin ƙananan wurare, pre-gyara gwargwadon iko kafin shigarwa, kuma yi amfani da lankwasawa mai tsawo don kwararar ruwa don inganta kwarara.
• ]Skipping da iska. ] A kananan foda dakin iya samun wani raba rigar iska, amma idan ka ƙara shawa, za ka iya bukatar wani taimako iska shigarwa bawul (AAV) a karkashin wanka.
• ] watsi da tsabtace. Sanya kayan tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabtace tsabta
• Zaɓin gidan wanka mara kyau. Yawancin wuraren wanka na yau da kullun suna buƙatar inci 12 daga bango zuwa tsakiyar flange. Idan kuna da inci 10 ko 14, yi amfani da gidan wanka mai jituwa ko flange na offset.

Spruce ya bayyana mahimman alamun lambar bututun ruwa wanda zai iya ceton ku daga rashin nasarar dubawa.

9. Bin Dokokin da Iyakoki

Yawancin gundumomi suna buƙatar izini don kowane aikin famfo wanda ya ƙunshi sauya ruwa, ɓarnar ruwa, da kuma iska (DWV). maye gurbin famfo ko gidan wanka bazai iya zama ba, amma motsawa mai ruwa yana buƙatar dubawa. Rashin cire izini na iya haifar da tarar kuɗi ko ƙauracewar aikin. Bincika bukatun sashen ginin ku na gida. Muhimman lambobin lamba na yau da kullun: bawul din shawa dole ne su kasance masu hana ƙonawa, flanges na gidan wanka dole ne su kasance a matakin bene, kuma hanyoyin iska dole ne su kasance daidai. Ga ƙananan dakunan wanka, lambar sau da yawa tana ba da izinin zubar inci 1.5 don shawa (har zuwa kayan haɗi 2) da kuma ruwan sama na inci 2 idan shawa ya fi girma. Koyaushe tabbatar.

Hakanan tabbatar da cewa duk wani aikin lantarki kusa da bututun ruwa (kamar GFCI fitowa kusa da sinks) ya cika lambar. Yi amfani da haɗin haɗin lantarki tsakanin bututun jan ƙarfe da ƙarfe don hana lalata. A wuraren da ke fuskantar girgizar ƙasa, tabbatar da masu sanyaya ruwa tare da madauri da amfani da masu haɗa mai sassauƙa akan na'urori.

10. Abubuwan da Za a Yi Game da Samun Samun Samun

Ko da a cikin ƙaramin gidan wanka, yi tunani game da tsayayyar gaba don tsufa a wuri ko baƙi da ke da ƙalubalen motsi. Sanya toshe a cikin bango don ɗaukar sanduna kusa da gidan wanka da shawa wannan mai sauƙi ne yayin da ake haɗuwa kuma mai ƙima daga baya. Yi amfani da gidan wanka mai ta'aziyya (1719 inci wurin zama). Zaɓi kaifin wanka mai ɗaukar hoto tare da sandunan zamewa don daidaitaccen tsayi. Don wanka, bar sararin gwiwa a ƙarƙashin samfurin bango ko wani fanko tare da buɗe tushe. faɗaɗa buɗe ƙofar zuwa aƙalla inci 32 idan zai yiwu. Waɗannan haɓakawa suna ƙara ƙarancin farashi yayin gyara amma suna da tsada mai tsada daga baya.

Idan kuna shirin yin wanka ba tare da iyaka ba, dole ne bene ya zame zuwa wani ruwa mai laushi, kuma dole ne bene na gidan wanka ya kasance mai hana ruwa a ko'ina. Yi amfani da tayal mai tsayayya da zamewa. Sanya ɗakunan wanka don kayan wanka. Duk waɗannan bayanan suna sa ƙaramin gidan wanka ya yi aiki ga masu amfani da yawa.

11. Yaushe Za Ka Kira Mai Hidimar Ruwa da Aka Ba da Lasisi

Duk da yake kammala bututun ruwa na iya zama ƙoƙari na DIY, wasu yanayi suna buƙatar taimakon ƙwararru: idan kuna buƙatar sauya babban ɗakunan, yankewa a cikin wani ruwan wanka na baƙin ƙarfe, ko ɗaure shi cikin madauki na sake zagayowar ruwa mai zafi. Hakanan, idan ikon mallakar ku na gida yana buƙatar izini don gyaran bututun ruwa (mafi yawa yi don kowane aiki wanda ya shafi ruwa, ɓarnatarwa, da haɗin iska), hayar mai lasisi mai lasisi yana tabbatar da aikin ya wuce dubawa. Kwararre na iya ɗaukar matakan iska mai wuyar gaske a cikin ƙananan wanka inda AAV ba zai cika lambar ba. Kudin mai sana'a galibi ya fi kuɗin tsage tayal don gyara ɓoyayyen ɓoye.

Sauran alamun ja: layin samar da karfe mai galvanized (sun lalata a ciki), layin ruwa tare da basements (hadarin ajiyar), ko kuma idan ka riga da bututun ruwa yana amfani da tsohon kayan kamar polybutylene.

Ƙarshen

Masanin fasahar kammala bututun ruwa a cikin ƙaramin gidan wanka yana ƙunshe da cikakken shiri, kayan da suka dace, da kuma cikakken gwaji. Ta hanyar fahimtar shimfidar wuri, shigar da kayan haɗi tare da daidaito, da kuma tabbatar da kowane haɗi kafin rufe ganuwar, kuna ƙirƙirar tsarin da zai yi aiki da aminci na shekaru da yawa. Ƙananan dakunan wanka suna da ƙuntatawa na musamman, amma suna ba da dama ga kyawawan mafita kamar kayan ruwan sama mai ƙarancin ruwan sama ko wuraren wanka na kusurwa waɗanda ke cin gajiyar kowane inci. Bi matakan da aka bayyana a nan, kuma gidan wanka da aka sake tsara zai kasance kyakkyawa da kuma ɗawainiya.

Ka tuna ka rubuta aikinka da hotuna da bayanan da za ka iya yi a nan gaba. Ka saka hannun jari a cikin kayan aiki masu inganci inda suka fi muhimmanci (aljihunan, kashewa, da flange). Kuma kada ka yi jinkirin tuntuɓar ƙwararren masani don sassan da ba ka da tabbacin. Gyara ƙaramin gidan wanka mai nasara shine wanda yake da kyau, yana aiki daidai, kuma ba ya sa ka yi tunani game da bututun da ke bayan ganuwar.